| |
Forensic Science International is a peer-reviewed, international journal
for the publication of original contributions in the many different scientific disciplines comprising the forensic sciences. These fields
include, but are not limited to, forensic pathology and histochemistry, toxicology (including drugs, alcohol, etc.), serology, chemistry,
biochemistry, biology (including the identification of hairs and fibres), odontology, psychiatry, anthropology, the physical sciences,
firearms, and document examination, as well as the many other disciplines where science and medicine interact with the law.
Types of paper
1. Original Research Papers (Regular Papers)
2. Review Articles
3. Forensic Anthropology
Population Data
3. Preliminary Communications
4. Letters to the Editor
5. Case Reports
6. Book Reviews
7. Rapid
Communications
Please note that all contributions of type 4 to 7 will be published as e-only articles. Their citation details, including
e-page numbers, will continue to be listed in the relevant print issue of the journal's Table of Contents.
Announcement of Population
Data: these types of articles will be published in Forensic Science International: Genetics, only. Please submit these articles via
 http://www.ees.elsevier.com/fsigen/.
Review Articles and Preliminary Communications (where brief accounts of
important new work may be announced with less delay than is inevitable with major papers) may be accepted after correspondence with the
appropriate Associate Editor.
Forensic Anthropology Population Data: Although the main focus of the anthropology section
of the journal remains on the publication of original research, authors are invited to submit their forensic anthropology population
data articles by selecting the "Forensic Anthropology Population Data" article type on the online submission system. When submitting
a Forensic Anthropology Population data article, please assure that "Forensic Anthropology Population Data" is included as
one of the keywords. These forensic anthropology population data articles involve the application of already published and standardised
methods of aging, sexing, determination of ancestry and stature and other well known diagnoses on different populations. This is at the
heart of applied forensic anthropology. For example, in order to correctly assess age, stature or even sex of individuals of different
ancestry or from different populations, it is fundamental that the method be tested on the specific population one is working on. In
building the biological profile of a skeleton in order to aid identification, one needs to calibrate such techniques on the population
of interest before applying them. The same may be true in a completely different scenario of anthropology, for example identifying criminals
taped on video surveillance systems and aging victims of juvenile pornography. This section is dedicated to forensic anthropological
population data and other types of updates (state of the art of particular issues, etc.), particularly concerning the following:
-
Sexing
- Aging sub adult skeletal remains
- Aging adult skeletal remains
- Aging living sub adults and adults
- Determining
ancestry
- Stature estimation
- Facial reconstruction
- Non metric trait distribution, pathology and trauma
- Positive
identification of human skeletal remains
- Positive identification of the living
Forensic Anthropology Population Data articles
will be published in abridged form in print (a clear, descriptive summary taken from the abstract), and the full length article will
be published online only. Full citation details and a reference to the online article, including e-page numbers, will be published in
the relevant print issue of the journal. All submitted manuscripts will be evaluated by a strict peer review process.
Case Reports
will be accepted only if they contain some important new information for the readers.
Rapid Communications should describe
work of significant interest, whose impact would suffer if publication were not expedited. They should not be longer than 5 printed journal
pages (about 10 submitted pages). Authors may suggest that their work is treated as a Rapid Communication, but the final decision on
whether it is suitable as such will be taken by the handling Associate Editor. Rapid Communications requiring rev
Revisions deadline
Please note that articles that are sent to the author for revision need to be returned
within four months. A reminder will be sent in the third month. Any articles that are sent after the fourth month period of revision
will be considered a re-submission.
Contact details for submission
Papers
for consideration should be submitted by topic. Editors and their topic specialty are listed below.
P. Saukko (Editor-in-Chief):
Experimental Forensic Pathology, Traffic Medicine, and subjects not listed elsewhere
Tel: +358 2 3337543
Fax: +358 2 3337600
E-mail: psaukko@utu.fi
A. Carracedo: Forensic Genetics. Please note only review articles on this topic
should be submitted to FSI. All non-review papers should be submitted to the FSI daughter journal devoted to this subject Forensic Science
International: Genetics, via http://ees.elsevier.com/fsigen/
Fax:+34 981 580336
E-mail: carrafsi@usc.es
C. Cattaneo: Osteology and Anthropology
Tel: +39 2 5031 5678
Fax: +39 2 5031 5724
E-mail: cristina.cattaneo@unimi.it
P. Margot: Questioned Documents and Physical Science: ballistics, tool marks, contact traces, drugs analysis, fingerprints and
identification, etc.
Tel: +41 21 692 4605
Fax: +41 21 692 4605
E-mail: pierre.margot@unil.ch
O.H. Drummer:
Toxicology
Tel: +61 3 9684 4334
Fax: +61 3 9682 7353
E-mail: olaf@vifm.org
G. Willems: Odontology
Tel: +32 16 33 24 59
Fax: +32 16 33 24 35
E-Mail: guy.willems@med.kuleuven.ac.be
Ethics in Publishing
For information
on Ethics in Publishing and Ethical guidelines for journal publication see http://www.elsevier.com/publishingethics and
http://www.elsevier.com/ethicalguidelines.
Conflict of interest
All
authors are requested to disclose any actual or potential conflict of interest including any financial, personal or other relationships
with other people or organizations within three years of beginning the submitted work that could inappropriately influence, or be perceived
to influence, their work. See also http://www.elsevier.com/conflictsofinterest.
Submission declaration
Submission of an article implies that the work described has not been published previously (except
in the form of an abstract or as part of a published lecture or academic thesis), that it is not under consideration for publication
elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was
carried out, and that, if accepted, it will not be published elsewhere including electronically in the same form, in English or in any
other language, without the written consent of the copyright-holder.
Additional information
Multiple submissions is not acceptable to the Editor, and any such papers, together with future submissions from the authors,
will be rejected outright. Submission also implies that all authors have approved the paper for release and are in agreement with its
content.
Contributors
Each author is required to declare his or her individual
contribution to the article: all authors must have materially participated in the research and/or article preparation, so roles for all
authors should be described. The statement that all authors have approved the final article should be true and included in the disclosure.
Copyright
Upon acceptance of an article, authors will be asked to complete a 'Journal Publishing Agreement'
(for more information on this and copyright see http://www.elsevier.com/copyright). Acceptance of the agreement will ensure
the widest possible dissemination of information. An e-mail will be sent to the corresponding author confirming receipt of the manuscript
together with a 'Journal Publishing Agreement' form or a link to the online version of this agreement.
Subscribers may reproduce
tables of contents or prepare lists of articles including abstracts for internal circulation within their institutions. Permission of
the Publisher is required for resale or distribution outside the institution and for all other derivative works, including compilations
and translations (please consult http://www.elsevier.com/permissions). If excerpts from other copyrighted works are included,
the author(s) must obtain written permission from the copyright owners and credit the source(s) in the article. Elsevier has preprinted
forms for use by authors in these cases: please consult http://www.elsevier.com/permissions.
Retained author rights
As an author you (or your employer or institution) retain certain rights; for details
you are referred to: http://www.elsevier.com/authorsrights.
Role of the
funding source
You are requested to identify who provided financial support for the conduct of the research and/or preparation
of the article and to briefly describe the role of the sponsor(s), if any, in study design; in the collection, analysis and interpretation
of data; in the writing of the report; and in the decision to submit the paper for publication. If the funding source(s) had no such
involvement then this should be stated. Please see http://www.elsevier.com/funding.
Funding body agreements and policies
Elsevier has established agreements and developed policies to allow authors whose
articles appear in journals published by Elsevier, to comply with potential manuscript archiving requirements as specified as conditions
of their grant awards. To learn more about existing agreements and policies please visit http://www.elsevier.com/fundingbodies.
Language and language services
Please write your text in good English (American or British usage is accepted,
but not a mixture of these). Authors who require information about language editing and copyediting services pre- and post-submission
please visit http://www.elsevier.com/languageediting or our customer support site at http://support.elsevier.com
for more information.
Submission
Submission to this journal proceeds totally
online and you will be guided stepwise through the creation and uploading of your files. The system automatically converts source files
to a single PDF file of the article, which is used in the peer-review process. Please note that even though manuscript source files are
converted to PDF files at submission for the review process, these source files are needed for further processing after acceptance. All
correspondence, including notification of the Editor's decision and requests for revision, takes place by e-mail removing the need for
a paper trail.
Submit your article
Please submit your article via
http://ees.elsevier.com/fsi.
Article structure
Introduction
State the objectives
of the work and provide an adequate background, avoiding a detailed literature survey or a summary of the results.
Material and methods
Provide sufficient detail to allow the work to be reproduced. Methods already
published should be indicated by a reference: only relevant modifications should be described.
Results
Results should be clear and concise.
Discussion
This should explore the significance of the results of the work, not repeat them. A combined Results and Discussion section is often
appropriate. Avoid extensive citations and discussion of published literature.
Conclusions
The main conclusions of the study may be presented in a short Conclusions section, which may stand alone or form a subsection of
a Discussion or Results and Discussion section.
Essential title page information
•
Title.
Concise and informative. Titles are often used in information-retrieval systems. Avoid abbreviations
and formulae where possible.
•
Author names and affiliations.
Where the family name may be ambiguous (e.g., a
double name), please indicate this clearly. Present the authors' affiliation addresses (where the actual work was done) below the names.
Indicate all affiliations with a lower-case superscript letter immediately after the author's name and in front of the appropriate address.
Provide the full postal address of each affiliation, including the country name, and, if available, the e-mail address of each author.
•
Corresponding author.
Clearly indicate who will handle correspondence at all stages of refereeing and publication, also
post-publication. Ensure that telephone and fax numbers (with country and area code) are provided in addition to the e-mail address
and the complete postal address.
•
Present/permanent address.
If an author has moved since the work described
in the article was done, or was visiting at the time, a "Present address" (or "Permanent address") may be indicated as a footnote to
that author's name. The address at which the author actually did the work must be retained as the main, affiliation address. Superscript
Arabic numerals are used for such footnotes.
Abstract
A concise and factual
abstract is required. The abstract should state briefly the purpose of the research, the principal results and major conclusions. An
abstract is often presented separately from the article, so it must be able to stand alone. For this reason, References should be avoided,
but if essential, then cite the author(s) and year(s). Also, non-standard or uncommon abbreviations should be avoided, but if essential
they must be defined at their first mention in the abstract itself.
Keywords
Immediately
after the abstract, provide a maximum of 6 keywords, using American spelling and avoiding general and plural terms and multiple concepts
(avoid, for example, "and", "of"). Be sparing with abbreviations: only abbreviations firmly established in the field may be eligible.
These keywords will be used for indexing purposes.
Acknowledgements
Collate
acknowledgements in a separate section at the end of the article before the references and do not, therefore, include them on the title
page, as a footnote to the title or otherwise. List here those individuals who provided help during the research (e.g., providing language
help, writing assistance or proof reading the article, etc.).
Artwork
Color artwork
Please make sure that artwork files are in an acceptable format (TIFF, EPS or MS Office
files) and with the correct resolution. If, together with your accepted article, you submit usable color figures then Elsevier will ensure,
at no additional charge, that these figures will appear in color on the Web (e.g., ScienceDirect and other sites) regardless of whether
or not these illustrations are reproduced in color in the printed version. For color reproduction in print, you will receive information
regarding the costs from Elsevier after receipt of your accepted article. Please indicate your preference for color in print or on
the Web only. For further information on the preparation of electronic artwork, please see http://www.elsevier.com/artworkinstructions.
Please note: Because of technical complications which can arise by converting color figures to "gray scale" (for the printed version
should you not opt for color in print) please submit in addition usable black and white versions of all the color illustrations.
Tables
Number tables consecutively in accordance with their appearance in the text. Place footnotes to tables
below the table body and indicate them with superscript lowercase letters. Avoid vertical rules. Be sparing in the use of tables and
ensure that the data presented in tables do not duplicate results described elsewhere in the article.
References
Citation in text
Please ensure that
every reference cited in the text is also present in the reference list (and vice versa). Any references cited in the abstract must be
given in full. Unpublished results and personal communications are not recommended in the reference list, but may be mentioned in the
text. If these references are included in the reference list they should follow the standard reference style of the journal and should
include a substitution of the publication date with either "Unpublished results" or "Personal communication" Citation of a reference
as "in press" implies that the item has been accepted for publication.
Reference
style
Text: Indicate references by number(s) in square brackets in line with the text. The actual authors can be
referred to, but the reference number(s) must always be given.
Example: "..... as demonstrated [3,6]. Barnaby and Jones [8] obtained
a different result ...."
List: Number the references (numbers in square brackets) in the list in the order in which they
appear in the text.
Examples:
Reference to a journal publication:
[1] J. van der Geer, J.A.J. Hanraads, R.A. Lupton,
The art of writing a scientific article, J. Sci. Commun. 163 (2000) 51–59.
Reference to a book:
[2] W. Strunk Jr., E.B.
White, The Elements of Style, third ed., Macmillan, New York, 1979.
Reference to a chapter in an edited book:
[3] G.R. Mettam,
L.B. Adams, How to prepare an electronic version of your article, in: B.S. Jones, R.Z. Smith (Eds.), Introduction to the Electronic Age,
E-Publishing Inc., New York, 1999, pp. 281–304.
Video data
Elsevier
accepts video material and animation sequences to support and enhance your scientific research. Authors who have video or animation files
that they wish to submit with their article are strongly encouraged to include these within the body of the article. This can be done
in the same way as a figure or table by referring to the video or animation content and noting in the body text where it should be placed.
All submitted files should be properly labeled so that they directly relate to the video file's content. In order to ensure that your
video or animation material is directly usable, please provide the files in one of our recommended file formats with a maximum size of
10 MB. Video and animation files supplied will be published online in the electronic version of your article in Elsevier Web products,
including ScienceDirect: http://www.sciencedirect.com. Please supply 'stills' with your files: you can choose any frame
from the video or animation or make a separate image. These will be used instead of standard icons and will personalize the link to your
video data. For more detailed instructions please visit our video instruction pages at http://www.elsevier.com/artworkinstructions.
Note: since video and animation cannot be embedded in the print version of the journal, please provide text for both the electronic and
the print version for the portions of the article that refer to this content.
Supplementary
data
Elsevier accepts electronic supplementary material to support and enhance your scientific research. Supplementary files
offer the author additional possibilities to publish supporting applications, high-resolution images, background datasets, sound clips
and more. Supplementary files supplied will be published online alongside the electronic version of your article in Elsevier Web products,
including ScienceDirect: http://www.sciencedirect.com. In order to ensure that your submitted material is directly usable,
please provide the data in one of our recommended file formats. Authors should submit the material in electronic format together with
the article and supply a concise and descriptive caption for each file. For more detailed instructions please visit our artwork instruction
pages at http://www.elsevier.com/artworkinstructions.
Submission checklist
It is hoped that this list will be useful during the final checking of an article prior to sending it to the journal's Editor
for review. Please consult this Guide for Authors for further details of any item.
Ensure that the following items are present:
One Author designated as corresponding Author:
• E-mail address
• Full postal address
• Telephone and
fax numbers
All necessary files have been uploaded
• Keywords
• All figure captions
• All tables (including
title, description, footnotes)
Further considerations
• Manuscript has been "spellchecked" and "grammar-checked"
•
References are in the correct format for this journal
• All references mentioned in the Reference list are cited in the text,
and vice versa
• Permission has been obtained for use of copyrighted material from other sources (including the Web)
•
Color figures are clearly marked as being intended for color reproduction on the Web (free of charge) and in print or to be reproduced
in color on the Web (free of charge) and in black-and-white in print
• If only color on the Web is required, black and white
versions of the figures are also supplied for printing purposes
For any further information please visit our customer support site
at http://support.elsevier.com.
Use of the Digital Object Identifier
The Digital
Object Identifier (DOI) may be used to cite and link to electronic documents. The DOI consists of a unique alpha-numeric character string
which is assigned to a document by the publisher upon the initial electronic publication. The assigned DOI never changes. Therefore,
it is an ideal medium for citing a document, particularly 'Articles in press' because they have not yet received their full bibliographic
information. The correct format for citing a DOI is shown as follows (example taken from a document in the journal Physics Letters
B):
doi:10.1016/j.physletb.2003.10.071
When you use the DOI to create URL hyperlinks to documents on the web, they are guaranteed
never to change.
Proofs
One set of page proofs (as PDF files) will be
sent by e-mail to the corresponding author (if we do not have an e-mail address then paper proofs will be sent by post) or, a link will
be provided in the e-mail so that authors can download the files themselves. Elsevier now provides authors with PDF proofs which can
be annotated; for this you will need to download Adobe Reader version 7 (or higher) available free from http://www.adobe.com/products/acrobat/readstep2.html.
Instructions on how to annotate PDF files will accompany the proofs (also given online). The exact system requirements are given at the
Adobe site: http://www.adobe.com/products/acrobat/acrrsystemreqs.html#70win.
If you do not wish to use the PDF annotations
function, you may list the corrections (including replies to the Query Form) and return them to Elsevier in an e-mail. Please list your
corrections quoting line number. If, for any reason, this is not possible, then mark the corrections and any other comments (including
replies to the Query Form) on a printout of your proof and return by fax, or scan the pages and e-mail, or by post. Please use this proof
only for checking the typesetting, editing, completeness and correctness of the text, tables and figures. Significant changes to the
article as accepted for publication will only be considered at this stage with permission from the Editor. We will do everything possible
to get your article published quickly and accurately. Therefore, it is important to ensure that all of your corrections are sent back
to us in one communication: please check carefully before replying, as inclusion of any subsequent corrections cannot be guaranteed.
Proofreading is solely your responsibility. Note that Elsevier may proceed with the publication of your article if no response is received.
Offprints
The corresponding author, at no cost, will be provided with a PDF file of the article via e-mail
or, alternatively, 25 free paper offprints. If the corresponding author opts for paper offprints, this preference must be indicated via
the offprint order form which is sent once the article is accepted for publication. Additional paper offprints can also be ordered via
this form for an extra charge. The PDF file is a watermarked version of the published article and includes a cover sheet with the journal
cover image and a disclaimer outlining the terms and conditions of use.
Author orders
When your article is published, you can commemorate your publication with printed author copies of the journal issue, customized
full-color posters, extra offprints, and more. Please visit https://authororders.elsevier.com
to learn more.
For inquiries relating to the submission
of articles (including electronic submission where available) please visit this journal's homepage. You can track accepted articles at
http://www.elsevier.com/trackarticle and set up e-mail alerts to inform you of when an article's status has changed. Also
accessible from here is information on copyright, frequently asked questions and more. Contact details for questions arising after acceptance
of an article, especially those relating to proofs, will be provided by the publisher.
|
| |
|
